Base oil types are divided into five categories as follows.The first category, conventional solvent-refined mineral oils.The second category, hydrocracked mineral oils.Category III, highly hydrocracked or hydroisomerized waxes.Fourth category, polyalpha-olefins (PAO).Category V, other synthetic oils

Almost all diesel coagulant at lower temperatures are presented as more viscous state, so the coagulant stored at lower temperatures should be heated to above 20 ℃ before use to ensure that it is in solution before adding diesel, and to be added at a temperature above the cloud point of diesel, that is, when there is no wax precipitation from diesel. The addition amount is generally in 0.5‰~1.0‰, but the addition ratio of Lingzhi coagulant is larger.

After adding coagulant in diesel fuel, when the temperature is lowered and the wax crystal is formed, the coagulant will play the role of nucleating agent and wax crystal together or adsorbed on the surface of the wax crystal, preventing the mutual bonding between the wax crystal, preventing the generation of a continuous crystalline network, making the wax crystal particles more fine and can pass through the filter well. This destruction or change of wax crystallization function of the coagulant can reduce the cold filtration point and freezing point of diesel fuel.

Diesel fuel coagulant, also known as diesel fuel low-temperature fluidity improver or diesel fuel anti-wax settling agent, is a common additive in diesel fuel production. Diesel fuel coagulant on the refinery to increase the production of diesel fuel, improve the flexibility of production and diesel, steam ratio, improve economic efficiency has an obvious role. For the storage and transportation of diesel fuel and users, due to the application of coagulant, can significantly improve its low temperature performance.

The main function of fuel cleaner is to clean the injectors, intake valves, cylinder walls, piston tips and intake ducts of carbon deposits, in order to ensure that the effect of fuel additives can be fully developed, please add the additives to the fuel tank before refueling when the fuel is used up or there is little left. But how much do you know about fuel cleaners for cars? The following is a brief introduction to you.

What is carbon deposition? Carbon deposits and oil contamination are products produced inside the engine. At idle or low speed, the injector temperature is about 100℃ and the intake valve temperature is between 200-300℃. Under long-term idling or low-speed conditions, the unstable factors in the fue