How fuel cleaner works

The main function of fuel cleaner is to clean the injectors, intake valves, cylinder walls, piston tips and intake ducts of carbon deposits, in order to ensure that the effect of fuel additives can be fully developed, please add the additives to the fuel tank before refueling when the fuel is used up or there is little left. But how much do you know about fuel cleaners for cars? The following is a brief introduction to you.

When the car engine is running, the temperature will rise sharply, and the fuel will not be burned sufficiently at high temperature to generate gum and carbon, which will be precipitated on the intake valve, causing the intake channel cross-sectional area to be reduced, and the intake efficiency to be lowered, and the power to be reduced. 

And the precipitation on the injection nozzle will lead to the decrease of fuel atomization quality, and the fuel will be difficult to be burned completely, thus making the engine start difficult and the idle speed unstable. Fuel cleaner is mainly to alleviate the engine problems caused by carbon deposits.

What is the working principle of fuel cleaner? In simple terms, fuel cleaner, with its strong surface activity of molecular components, enters the pores of carbon deposits, destroys their structure, and divides and surrounds these carbon particles, gradually dissolving them from the metal surface and burning them with fuel at high temperature and then exhausting them through the exhaust gas.

Tips for using fuel cleaner: Fuel system additive needs to be used regularly, normally you need to add one bottle at an interval of 10,000 km, and add it to the gasoline tank, when you add it, we suggest you check the instruction manual carefully and add it according to the normal ratio. 

Note that clean fuel additive is not a cure-all for carbon deposits, especially for direct injection engines and for those who want to clean up the carbon deposits thoroughly, going to a professional repair shop to disassemble the parts for cleaning is the most effective and direct way.

Because if you have never used a cleaning additive before, it is not recommended to use this, but to use other types of additives. Because once a large piece of dirt is cleaned, the dirt will enter the cylinder and cause damage to the cylinder. 

And for the models that can use this additive, the amount of use should not be too much, otherwise it may not burn sufficiently, causing secondary The generation of carbon deposits. It is recommended to use it every 10,000 kilometers.